Monosole Music presents the fifth in a series of royalty free drum hits and drum breaks recorded directly to tape, mixed using analogue outboard gear, mastered onto a 12" dub plate and finally sampled back off of the vinyl.
Volume six contains 204 original drum breaks created using brushes. The tempos range from 85 to 100 bpm, and were specifically selected to represent the boom bap genre. Each break is provided as a pre-vinyl master and a vinyl-pressed version.
Recorded directly onto analogue tape using three microphones, a close mic on the kick drum, a close mic on the snare and an overhead mic. Mixed using analogue compressors and eq's before being sent to a Neumann cutting lathe. Performed and engineered by Timmy Rickard.
Tech Info:
- 1960's Round Badge Drum Kit
- recorded direct to tape at 15ips
- captured using an AKG D12 and a coles 4038
- powered by boutique transformer based preamps
- mixed using high quality analogue outboard equipment
- mastered to a 7" vinyl dub plate at 45rpm
Built For Modern MPCs & Force
Tape to Dubplate 6 is compatible with all modern standalone MPCs running MPC2 & MPC3, the MPC Software, MPC Beats and the Akai Force.
Technical Specs
| Contents: | 204 brush breaks sampled to vinyl, each provided in pre-vinyl master and post vinyl sampled versions |
| Format: | WAV |
| Compatibility: | Modern MPCs running MPC2 or MPC3 in standalone or controller mode. Also suitable for the Akai Force, MPC Software & MPC Beats |
| Supported Hardware: | MPC XL, MPC Live 3, MPC One / One+, MPC Live, MPC Live 2, MPC X / SE, MPC Key 37/61, Force. |
| Minimum Software/Firmware: | MPC 2.15, MPC 3.6, Force 3.3 |
| Developer: | Timmy Rickard (Monosole Music) |
| Delivery: | Download instantly after purchase |
